Re: multiMenu 1.5 - sublinks now supported !Thank you
Re: multiMenu 1.5 - sublinks now supported !hi solo71...
... a good work. Congratulations 
Re: multiMenu 1.5 - sublinks now supported !could you show me a demo site to see all these blocks especially Dlink block ??
thanks a lot
Re: multiMenu 1.5 - sublinks now supported !Demo link plz
Re: multiMenu 1.5 - sublinks now supported !WolFactory Thk. Good V1.5
Re: multiMenu 1.5 - sublinks now supported !Thanks for your appreciations... 
Demo link... err... hard to say. You won't see any difference between dynamic blocs and multiMenu blocs...
I have used them on my Star Wars site. All blocks are from multiMenu except the "about" ones.
Re: multiMenu 1.5 - sublinks now supported !fine, but that star-wars site doesnt seem to have sub menus.
i think i will install the module and check it. :)
Re: multiMenu 1.5 - sublinks now supported !Arf, yes... but you can see a sample on the author of the hack's site (thanks to him again).
You won't see any differences anyway between a multiMenu and Main block..? Which is the purpose of this.
Test it, and let me know.
Re: multiMenu 1.5 - sublinks now supported !tnx werewolf !
Re: multiMenu 1.5 - sublinks now supported !As usual Solo, thanks for publishing some of the most usefull module around !
Keep up the good work my friend !
Cheers !
Re: multiMenu 1.5 - sublinks now supported !YAYYY!!! Thanks, this is by far one of my favorite modules, thanks for keeping it updated.
Re: multiMenu 1.5 - sublinks now supported !YAYYY!!! Thanks, this is by far one of my favorite modules, thanks for keeping it updated.
Re: multiMenu 1.5 - sublinks now supported !YAYYY!!! Thanks, this is by far one of my favorite modules, thanks for keeping it updated.
Re: multiMenu 1.5 - sublinks now supported !looks cool! gotta try it! 
Re: multiMenu 1.5 - sublinks now supported !Hey Solo
Another great one 
We are waiting you at http://www.xoops.net.br
Came down and make a announcement
Thanks for sharing
Re: multiMenu 1.5 - sublinks now supported !Great one
Re: multiMenu 1.5... Help... error..I've installed it and it seem to be fine..
All the main menu and sub menu EXCEPT for the sub-menu of mylinks module... The sub menu for mylink module is not working.. I entered the link for Popular & Top Rated as follow:
Quote:
modules/mylinks/topten.php?hit=1
modules/mylinks/topten.php?rate=1
http://www.mysite.com/modules/mylinks/modules/mylinks/topten.php?hit=1
http://www.mysite.com/modules/mylinks/modules/mylinks/topten.php?rate=1
Re: multiMenu 1.5... Help... error..I don't see any reasons why it doesn't work for one module and not another one... 
Are you sure of the url you have used?
Re: multiMenu 1.5... Help... error..Yes... Im entered the correct link.
Re: multiMenu 1.5... Help... error..May I have a link to your site (and the name of the concerned block) so I can see on my own ?
Re: multiMenu 1.5 - sublinks now supported !
cool.. very nice work.. it has help me a lot. just today someone ask me to use sub-menu thing and I am using your module with little changes.. good one..
Thanks
Re: multiMenu 1.5 - sublinks now supported !PHP Parse error: parse error, unexpected T_STRING in /var/www/html/xoops/modules/multiMenu/blocks/multimenu.php on line 96
I was trying to add a main link followed by few sublinks. didnt select any image for the link.
Whats going wrong here?
Home page went blank.. Nothing shows up.
Re: multiMenu 1.5 - sublinks now supported !I am having the same problem right now. DId you get this fixed?
Re: multiMenu 1.5 - sublinks now supported !I don't know why...
So, here is the multiMenu 1.6.1_beta
Re: multiMenu 1.5 - sublinks now supported !I downloaded the multimenu 1.6 and updated my xoops. Now the multimenu is working very well. Thanks for this great module!
Re: multiMenu 1.5 - sublinks now supported !Thanks again for this awsome mod.
I was having the same problems with blank page. Im running 2.0.7.3.
Everything worked fine until I changed the visibility for block 1 to "Yes" in the SysAdmin | Blocks page.
After that, went I went home, the page was blank.
I then uninstalled and loaded the 1.6 beta. The MultiMenu 1 showed up when I activated it, however when I activated MultiMenu A or multimenu 2, I got a blank page again.
Guess Im gonna have to go back to 1.3.
If you need any more specific environment variables let me know.
Re: multiMenu 1.5 - sublinks now supported !btw -
just fyi -
When I delete a sublink, the change did not take effect until I updated the module. (1.6beta.)
Re: multiMenu 1.5 - sublinks now supported !Are you sure, you haven't put any cache on the module, or the concerned block ?
Re: multiMenu 1.5 - sublinks now supported !Yes sir, used it just like it came out of the box.
Do I need to change file permissions or anything after the install?
Re: multiMenu 1.5 - sublinks now supported !Anything new on this module. I'm currently running the 1.3 version. I haven't upgraded to the 1.5,because I read somewhere there is an even later version out now than 1.6
Re: multiMenu 1.5 - sublinks now supported !It' on the way.
Please read the discussion about multiMenu 1.6.
Re: multiMenu 1.5 - sublinks now supported !Hello!
This module is really interesting, matching my needs
But I had a problem : I wanted to link "homemade" pages (not XOOPS modules, but using XOOPS menu but including headers and footers).
And the sublink system didn't realize when I clicked on top link : so the sub-link are'nt displayed. I've of course taken care about the path issue. In the end, I checked in modules/multiMenu/blocks/multimenu.php.
In fact, I think that the sublink system DO need XOOPS module (it's my first look at XOOPS code, so I may be wrong). To avoid this problem, after those lines :
//-------------Added for showing submenu when actived-------
$imenu['showsub'] = 0;
if ( (!empty($xoopsModule)) && (eregi("/".$xoopsModule->getVar('dirname')."/", $link)) ) {
$imenu['showsub'] = 1;
}
I added :
$temppatharray=explode("/",$myrow['link']);
array_pop($temppatharray);
$baselink=implode("/",$temppatharray);
if (eregi($baselink ,$_SERVER['REQUEST_URI']))
{
$imenu['showsub'] = 1;
}
Is this ok ?
Re: multiMenu 1.5 - sublinks now supported !You should have a go on multiMenu 1.6 (test version) which provides permanent sublinks. Sublinks display all the time.
Isn't what you are looking for?
Re: multiMenu 1.5 - sublinks now supported !Thanks for your answer and for the link!
I've tried the new version, and it looks quite improved!!!(by the way, the update system doesn't work correctly....but by uninstalling and reinstalling after cleaning and re-uploadin, no problem! :)
But my issue is still unresolved with this update...anyway, my patch still works ;) (but the flie to modify is now "block.php", instead of "multimenu.php")
I think that I do not put enough information in my custom pages ("module like" info seems to be expected), and so multimenu doesn't recognise it. Here's my custom page :
include '../../mainfile.php';
include XOOPS_ROOT_PATH.'/header.php';
echo "test";
include(XOOPS_ROOT_PATH."/footer.php");
?>
Any ideas? Do you think my patch would be ok for my needs(once done in a more "clean" way ;) )
Btw, can't show you my page, it's in an intranet :'(
Re: multiMenu 1.5 - sublinks now supported !The question is : where did you put your custom pages ?
Maybe you should put them in a "modules/mydirectory" folder ?
Re: multiMenu 1.5 - sublinks now supported !They are in a modules/customcontent directory :(
Here is a screenshot from my admin panel :
http://gizmhail.free.fr/xoopsmm/admin.JPG
With this config:
* no patch:
- if I select the Projets link in the multiMenu1 block(btw, I haven't tested in main menu, because I like to have those links in a different block), the Projet1 sublink doesn't appears. same for Equipes sublink
* with patch
- if I select the Projets link, the Projet1 sublink appears. same for Equipes sublink
Sorry to bother you with this, I'm kinda troublesome sometimes
Re: multiMenu 1.5 - sublinks now supported !Btw, maybe I should continue this discussion in your 1.6 thread, since my problems are still present in current 1.6 version ?
Re: multiMenu 1.5 - sublinks now supported !Yes, that would be better.
In the meanwhile : is your "customcontent" module declared? I suppose this is a fake directory, but it needs to be declared has a module for Xoops.
So, here is a test you could do. Install your custom files in the 'multiMenu' directory. And test it that way.
Let me know.
Re: multiMenu 1.5 - sublinks now supported !Tested 1.5, 1.6 1.6.1 on my system (might work on yours) however, does not work on my system using multi menu as a replacement for the main menu.
After a few hours of testing, this is what I discovered (depending on your point of view) obs_classroom does not work with multiMenu or put in another way multiMenu does not work with obs_classroom. I will pass this information along in the forums.
Thanks
Re: multiMenu 1.5 - sublinks now supported !I don't know this module. So, please help me solve this problem, and tell me what's the phpdebug message.
There must probably be a common function there...
Re: multiMenu 1.5 - sublinks now supported !Solo, this was originally asked on My forums but I am as stomped as you are - however, I don't know the inner workings of multimenu, so I have a difficult time locating the problem, too.
Re: multiMenu 1.5 - sublinks now supported !Sorry for the delay..thanks Mithrandir for answering the question.
Not sure what to say other than while doing my testing I could never get obs_classroom to work with multimenu, at first I thought it was not multimenu because I would turn on the normal main menu and obs_classroom would still not work when I tested it however, when I removed multimenu completely obs_classroom worked. Further testing was done with the idea of adding multimenu again but not using it for the main menu only using for other menus, as soon as multimenu was installed obs_classroom stopped working and when uninstalled it worked again.
Hope this helps.
Thanks
| Stats | |
| Goal: | $100.00 |
| Due Date: | Nov 30 |
| Gross Amount: | $0.00 |
| Net Balance: | $0.00 |
| Left to go: | $100.00 |
 |
|
