XOOPS 2.0.10 Stable Released - XOOPS - XOOPS News

XOOPS

News

News World of XOOPS Developers Hacks Themes Archive Submit News

XOOPS: XOOPS 2.0.10 Stable Released

Posted by: MithrandirOn 2005/4/23 17:16:00 33944 reads

The XOOPS Core Development Team brings you the next step in XOOPS Development.

XOOPS version 2.0.10 is a security-improving release that lessens the use of fopen with URLs and brings a completely new tool for securing modules against CSRF attacks: The XoopsSecurity class (explained in the further pages)

This release contains files for the core-included versions of News and Newbb (1.1 and 1, respectively). If you use Newbb 2 and/or News 1.2 or later, you should not upload the files in modules/news and modules/newbb as they will mess up these modules.

This will also be the last release with "Core Modules" as you know them. News, Newbb, Mylinks and the rest will be replaced with module packages targeting different types of websites. However, the term "Core Module" will not disappear totally, but shift definition from "Module included with the core package" to "Module managing the core". More information on this will be given along with the development of XOOPS 2.1.0

Xoops 2.0.10 Full (.tar.gz)
Xoops 2.0.10 Full (.zip)
Xoops 2.0.9.2 to 2.0.10 Patch (.tar.gz)
Xoops 2.0.9.2 to 2.0.10 Patch (.zip)

====
XoopsSecurity
====
The new class for handling security handles some routines including checking the HTTP REFERER and global variable contamination by request parameters.

It also introduces a token system for securing forms against CSRF attacks.

The comments are owned by the author. We aren't responsible for their content.

Re: XOOPS 2.0.10 Stable Released

Chris03 Published 04/23/2005 17:50 Quite a regular Joined 02/22/2004 Comments 372

Great job XOOPS team!!!!

Re: XOOPS 2.0.10 Stable Released

artigas Published 04/23/2005 18:11 Quite a regular Joined 12/21/2004 Comments 208

Greetings -

Is there a problems if I am currently in XOOPS 2.0.9.3 (and not in 2.0.9.2)?

Thanks In Advance.

Regards,
Roberto Artigas

Re: XOOPS 2.0.10 Stable Released

smdcom Published 04/23/2005 18:24 Joined 04/27/2004 Comments 901

Thumbs up Xoops... Keep up the good work guys.

SMD

Re: XOOPS 2.0.10 Stable Released

Published 04/23/2005 18:28 Updated 04/23/2005 18:35 Joined Comments

Finally .. great job

Is modules must update ?

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/23/2005 18:35 XOOPS is my life! Joined 06/21/2003 Comments 6320

Quote:

Is there a problems if I am currently in XOOPS 2.0.9.3 (and not in 2.0.9.2)?

Not really. The upgrade is performed the same way, by uploading the patch archive content and updating the system module.

Re: XOOPS 2.0.10 Stable Released

Tabasco Published 04/23/2005 18:46 Quite a regular Joined 12/26/2003 Comments 203

Just upgraded our dummy test site, and everything seems to be good.

Nice Job XOOPS Team

Re: XOOPS 2.0.10 Stable Released

smdcom Published 04/23/2005 19:00 Joined 04/27/2004 Comments 901

Tested! All work great...

To XOOPS Japan Team,

Thanks for making XOOPS more security than before... thumbs up guys... Happy Xoopsing!

Re: XOOPS 2.0.10 Stable Released

teibaz Published 04/23/2005 20:35 Not too shy to talk Joined 06/13/2004 Comments 103

i'll upgread my rhcp site soon with this, thanks!

Re: XOOPS 2.0.10 Stable Released

gravies Published 04/23/2005 20:46 Not too shy to talk Joined 08/18/2004 Comments 119

Great work installed on my site without problems - some minor issues:

1) When adding a new user the User's Groups selection box does not work.

2) install directory in upgrade patch?

Some suggestions for next 2.0.x release:

3) Page links at top of imagemanager popup window!

4) Delete all custom templates from a module button.

5) Avatar to Edit Account - not view account.

6) Admin can upload and set user's avatar.

7) Allow admin to set default notification for new users to Email not PM

I know a lot of these will be done in 2.1 but the ones I mention should be super easy to implement as a stop gap to 2.1 release.

Thanks

Re: XOOPS 2.0.10 Stable Released

sotrasjakk Published 04/23/2005 20:47 Just popping in Joined 04/18/2005 Comments 13

Where can I find upgrade instructions? As far as I have seen, there are none provided with the upgrade package. I cannot find any at the documentation site either, and when I search the xoops-site with phrases like "how to update" and "upgrade instructions" the closest I get is a procedure listed in one of the forums, telling you should not perform an update, but sooner reinstall with the full new version. I am certain that there is a simple way to do this, but I am not willing to find out by trying and failing on a live site.

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/23/2005 20:59 Friend of XOOPS Joined 11/11/2004 Comments 3782

See this Faq Page on upgrade procedures.

Re: XOOPS 2.0.10 Stable Released

InterMed Published 04/23/2005 22:21 Just popping in Joined 03/06/2004 Comments 5

Hi all,
I'm glad this update is here, but I've got little problem. After installing it I get this message:
'Warning [Xoops]: Smarty error: unable to read resource: "db:system_block_dummy.html" [...] line 1084' and block contents are empty.
Any ideas what's wrong?

Re: XOOPS 2.0.10 Stable Released

Dave_L Published 04/23/2005 22:36 XOOPS is my life! Joined 11/07/2003 Comments 2277

I got that error too (after upgrading to 2.0.10 RC2). The error disappeared after I updated the system module (via the control panel).

Re: XOOPS 2.0.10 Stable Released

InterMed Published 04/23/2005 22:51 Just popping in Joined 03/06/2004 Comments 5

Yes, correct. Updating system modules does the trick.

Re: XOOPS 2.0.10 Stable Released

tommyb Published 04/23/2005 23:49 Just popping in Joined 04/19/2005 Comments 7

Should I continue to use GIJoe's XOOPS Protector module in addition to 2.0.10, or is it's protection now integrated into the core?

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/23/2005 23:57 Friend of XOOPS Joined 11/11/2004 Comments 3782

The protector still protects from other exploits. It can continue to be used, some checks from what I understand will be done twice. I am sure GIJOE will quickly update his module to take advantage of XOOPS new security features.

Re: XOOPS 2.0.10 Stable Released

zappster Published 04/24/2005 0:17 Just popping in Joined 04/24/2005 Comments 3

Thank you guys for the new release. Keep up the good work.

Can you please tell me how can i upgrade from 2.0.10 RC2 to 2.0.10 Stable ? Should i use the upgrade package from 2.0.9 to 2.0.10 ?

Thanks

Re: XOOPS 2.0.10 Stable Released

Dave_L Published 04/24/2005 0:28 Updated 04/24/2005 0:29 XOOPS is my life! Joined 11/07/2003 Comments 2277

You could use the upgrade package.

There were only three files changed between 2.0.10 RC2 and 2.0.10 final:

docs/CHANGES.txt
html/include/version.php
html/modules/newbb/post.php

The last one applies only to newbb version 1.

Re: XOOPS 2.0.10 Stable Released

zappster Published 04/24/2005 1:06 Just popping in Joined 04/24/2005 Comments 3

So, i have to change only these files and i have 2.0.10 stable version ?

In fact, first one is just a text file and the last one i will not update cause i'm using newbb 2.

Just html/include/version.php ?

Thanks

Re: XOOPS 2.0.10 Stable Released

Dave_L Published 04/24/2005 2:15 XOOPS is my life! Joined 11/07/2003 Comments 2277

That's correct. I also updated the system module, but I don't think that's really necessary if include/version.php is the only file changed.

Re: XOOPS 2.0.10 Stable Released

theycallmepj Published 04/24/2005 3:49 Just popping in Joined 12/31/2004 Comments 64

Excellent Job Guys!!
Upgrade went smoothly

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/24/2005 3:53 Updated 04/24/2005 3:54 Friend of XOOPS Joined 11/11/2004 Comments 3782

One question. Why is there an install folder included with the patch zip. it contains an index.php and a /class/settingmanager.php. What do I need to do with this folder?

Re: XOOPS 2.0.10 Stable Released

theycallmepj Published 04/24/2005 3:58 Just popping in Joined 12/31/2004 Comments 64

Does anyone know if there is a hack made yet for the auto login for 2.0.10? Or will the one for 2.0.9.2 work with it?

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/24/2005 4:01 Friend of XOOPS Joined 11/11/2004 Comments 3782

I am sure GIJOE will come out with one soon. I believe things are different with the new security and would be cautious to use one not written for this release.

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/24/2005 7:11 XOOPS is my life! Joined 06/21/2003 Comments 6320

Quote:

Why is there an install folder included with the patch zip

Yeah, that may not make too much sense, but there are 2 reasons.

The Lame Reason: I have finally found a way to automate the patch creation process and it takes all files changed... In this case, the two files in the installation directory were also included

The Less Lame Reason: Say you like to have a full XOOPS version as backup, but don't want to download the full version. If you have 2.0.9.2 full, you just need to download the patch and unpack it to the local location and you've got a full 2.0.10 version.

You should of course not upload the install directory files to an installed version.

Sorry for the missing upgrade instructions, I always forget them - simply because it is as simple as:

1. Download the upgrade patch
2. Upload the unpacked files to the webserver, overwriting existing files
3. Update system module

Re: XOOPS 2.0.10 Stable Released

jctsup1 Published 04/24/2005 7:18 Not too shy to talk Joined 05/23/2002 Comments 146

Installed this on my test site & none of the custom blocks are working. Yes, I did update the system module. I have cleared cache & templates_c directory just to make sure. Doesn't matter if there is text or which format I choose.

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/24/2005 7:33 XOOPS is my life! Joined 06/21/2003 Comments 6320

Using a non-default template set? Make sure the system_block_dummy.html template has been generated for your template set.

Re: XOOPS 2.0.10 Stable Released

jctsup1 Published 04/24/2005 7:59 Not too shy to talk Joined 05/23/2002 Comments 146

Mith -

That was it - took care of the problem. Thanks for your prompt reply!

---Jeffrey

Re: XOOPS 2.0.10 Stable Released

GIJOE Published 04/24/2005 11:12 Quite a regular Joined 08/13/2003 Comments 265

Congraturations and thanks to your efforts !! >Mithrandir and Skalpa

Although I'm sorry that I could not test the RC versions,
I believe that 2.0.10 is not the last version of 2.0.x

And autologin hack for 2.0.10 is available now

Re: XOOPS 2.0.10 Stable Released

marcan Published 04/24/2005 12:14 Just can't stay away Joined 10/08/2003 Comments 824

Congratulations guys !

Keep up the great work.

Cheers !

Re: XOOPS 2.0.10 Stable Released

m0nty Published 04/24/2005 18:07 XOOPS is my life! Joined 10/24/2003 Comments 3337

have updated my test site and no issues so far :) not had much testing tho..

great work :)

Re: XOOPS 2.0.10 Stable Released

monster Published 04/24/2005 20:33 Just popping in Joined 12/28/2004 Comments 58

must i use protector in XOOPS 2.0.10 ? or is this insert ?

Re: XOOPS 2.0.10 Stable Released

m0nty Published 04/24/2005 20:41 XOOPS is my life! Joined 10/24/2003 Comments 3337

Quote:

Poster: monster Posted: 2005/4/24 20:33:33

must i use protector in XOOPS 2.0.10 ? or is this insert ?

please read earlier posts on page 1 or 2 of these comments for your answer

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/24/2005 20:56 XOOPS is my life! Joined 06/21/2003 Comments 6320

Quote:

I believe that 2.0.10 is not the last version of 2.0.x

I can assure you that it is, GIJOE

I am working on XOOPS 2.1.0 and have no intentions of another 2.0.x release.

Re: XOOPS 2.0.10 Stable Released

Society Published 04/24/2005 22:41 Not too shy to talk Joined 01/10/2002 Comments 178

Hmmmz white site...
Anyone can help me to fix that Problem?

PHP Error:
Fatal error: pical_todays_schedule_show_tpl(): Failed opening required '/srv/www/htdocs/XXX/html/wwwXXXX/modules/a:2:{i:0;s:5:"piCal";i:1;s:1:"0";}/class/piCal.php' (include_path='.') in /srv/www/htdocs/XXX/html/wwwXXXX/modules/piCal/blocks/pical_todays_schedule.php on line 25
Warning [PHP]: mysql_result(): supplied argument is not a valid MySQL result resource in file modules/whatnews/blocks/whatsnew.php line 13
Warning [PHP]: mysql_result(): supplied argument is not a valid MySQL result resource in file modules/whatnews/blocks/whatsnew.php line 20
Warning [PHP]: mysql_result(): supplied argument is not a valid MySQL result resource in file modules/whatnews/blocks/whatsnew.php line 30
Warning [PHP]: mysql_result(): supplied argument is not a valid MySQL result resource in file modules/whatnews/blocks/whatsnew.php line 31

Re: XOOPS 2.0.10 Stable Released

Society Published 04/24/2005 23:10 Updated 04/24/2005 23:13 Not too shy to talk Joined 01/10/2002 Comments 178

Hmm i found more Problems.

Counter of Download Info BLock do not work anymore, xgcal thumbnail blocks..... same to adress block and some other modules.....

Please FIX THAT :)

Re: XOOPS 2.0.10 Stable Released

Ernst Published 04/24/2005 23:36 Updated 04/24/2005 23:52 Just popping in Joined 01/08/2005 Comments 7

I have almost the same problems as Society:

- Recent Links block doesn't display the date anymore, only 'Linkname()'
- Scrolling Thumbnails doesn't display thumbnails anymore, only an empty block
- istats counter block with number of visitors doesn't display the numbers anymore

All these problems occurs even after that I modified the block properties.
Everything was working fine before the upgrade.

Error that I get:
Notice [PHP]: Undefined variable: concat in file class/xoopsblock.php(146) : eval()'d code line 13
Notice [PHP]: Undefined variable: XOOPS_URL in file class/xoopsblock.php(146) : eval()'d code line 13
Notice [PHP]: unserialize(): Error at offset 0 of 2 bytes in file kernel/object.php line 342

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/25/2005 1:11 Updated 04/25/2005 1:12 Friend of XOOPS Joined 11/11/2004 Comments 3782

Not sure about the others, but I had several blocks, and always do after a system module update, that I had to go into the blocks admin page and re edit the options for the block.

Istats I had to do that for. Multimenu however would not show links. I had to update that module to get the links to show.

Also if you are using a cloned template set, there is a new system template that will need to be generated. The "system_block_dummy.html" template.

Any upgrade requires a little work to get things back in order. Check all your settings, then if there are still problems then there may be a bug. But mostly it is from settings returning to default or null.

Re: XOOPS 2.0.10 Stable Released

pvtpyro Published 04/25/2005 2:11 Just popping in Joined 02/24/2005 Comments 67

I just upgraded, when i go to myurl/install I get this message: any ideas?

Warning: main(./passwd.php): failed to open stream: No such file or directory in /var/www/html/xoop/install/index.php on line 30

Warning: main(): Failed opening './passwd.php' for inclusion (include_path='.:/php/includes:/usr/share/php') in /var/www/html/xoop/install/index.php on line 30

Warning: Cannot modify header information - headers already sent by (output started at /var/www/html/xoop/install/index.php:30) in /var/www/html/xoop/install/index.php on line 33

Warning: Cannot modify header information - headers already sent by (output started at /var/www/html/xoop/install/index.php:30) in /var/www/html/xoop/install/index.php on line 34
You can not access this XOOPS installer.

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/25/2005 2:42 Friend of XOOPS Joined 11/11/2004 Comments 3782

If you are upgrading you do not need the install folder. Remove the install folder from the server and update your system module.

Re: XOOPS 2.0.10 Stable Released

pvtpyro Published 04/25/2005 3:50 Just popping in Joined 02/24/2005 Comments 67

I feel like a bonehead. Thank you so much

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/25/2005 3:52 Friend of XOOPS Joined 11/11/2004 Comments 3782

Don't feel like that I asked earlier in this series of comments.

Re: XOOPS 2.0.10 Stable Released

Ernst Published 04/25/2005 4:52 Just popping in Joined 01/08/2005 Comments 7

Hi jdseymour,

This problem is fixed: 'istats counter block with number of visitors doesn't display the numbers anymore' because the number of digits (displayed images) was '0'.....

I check all the setting for the my other two problems but could not find anything.

So, help is still welcome for:
- Recent Links block doesn't display the date anymore, only 'Linkname()'
- Scrolling Thumbnails doesn't display thumbnails anymore, only an empty block

Error that I get:
Notice [PHP]: Undefined variable: concat in file class/xoopsblock.php(146) : eval()'d code line 13
Notice [PHP]: Undefined variable: XOOPS_URL in file class/xoopsblock.php(146) : eval()'d code line 13
Notice [PHP]: unserialize(): Error at offset 0 of 2 bytes in file kernel/object.php line 342

Re: XOOPS 2.0.10 Stable Released

Falcon22 Published 04/25/2005 5:09 Updated 04/25/2005 5:10 Just popping in Joined 12/26/2003 Comments 58

I uploaded all the files for an update but when I go to the Control Panel and try to update the System Modules I have the regular message "Press the button below to update this module" BUT NO BUTTON!

I have had problems with updates before because of my Permissions - CHMOD so I set most of them to 777. My site seems to be functioning except I cannot access any of the site preferences menus.

HELP

Re: XOOPS 2.0.10 Stable Released

monster Published 04/25/2005 8:05 Just popping in Joined 12/28/2004 Comments 58

For all those the following forwards to have I can say which do not go.
Xoops 2.0.10 with the Multilingual 2.0 goes.
Xoops 2.0.10 with ipb updates on 2.0.10 does not go however in admin the Prefences the sides any longer updated if one to changes makes e.g. the language to change and then on memory presses to over takes gets one only a white side and the changes is not taken over.
Xoops 2.0.10 + ml 2.0 + ipb 1.4G of the errors from above and with the call of forum comes an error includes/multilingual.php line 85 (non object-error).
My result I remains with the 2.0.9.3 with protector and has it multilingual and with ipb 1.4Ga.
If for it the solutions know would gratefully be I if this are gepostet here.

I am from german and my english is bad.

Re: XOOPS 2.0.10 Stable Released

malexandria Published 04/25/2005 11:03 Quite a regular Joined 12/23/2001 Comments 281

went from 2.092 - 2.10 with no problems, great work guys.

Re: XOOPS 2.0.10 Stable Released

malexandria Published 04/25/2005 12:13 Quite a regular Joined 12/23/2001 Comments 281

Blocks Suggestion -

Is there anyway to organize the block group permissions area better? I use custom blocks extensively and probably have at leas 200 blocks - only a few on display of course. In the admin area under the group permissions area, instead of new blocks being displayed in order - either the first or last it seems to be randomly placed. So I have to hunt and peck to find the block to make it viewable. It would be so much easier if the last (newest) block created was the very first or last block or in some sort of logical order, instead of just randomly (seemingly) thrown together.

I hope I explained that right, or maybe it's better explained this way -

in Groups you have, Left, Right, Center on my Left and Right Blocks I have at leas 40 different blocks each - old ones that I haven't deleted.

When I create a new block, it isn't displayed in order of creation, it's lumped in there, so I have to hunt for it. I'd like an easier way to sort this area so that it displays better.

Re: XOOPS 2.0.10 Stable Released

artigas Published 04/25/2005 12:17 Quite a regular Joined 12/21/2004 Comments 208

Greetings -

Quote:

Also if you are using a cloned template set, there is a new system template that will need to be generated. The "system_block_dummy.html" template.

While I am not using a clone template set, I would still like to know how does one go about generating the "system_block_dummy.html"?

Thanks In Advance.

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 04/25/2005 12:21 Friend of XOOPS Joined 11/11/2004 Comments 3782

In System Admin - Templates, click on list your cloned templates, the one missing will be highlited in yellow. Click on the generate link by the affected template and follow on screen instructions.

Re: XOOPS 2.0.10 Stable Released

artigas Published 04/25/2005 12:36 Updated 04/25/2005 12:37 Quite a regular Joined 12/21/2004 Comments 208

Greetings jdseymour -
Thank You For Your Response.
Enjoy!
Roberto Artigas

Re: XOOPS 2.0.10 Stable Released

m0nty Published 04/25/2005 18:47 XOOPS is my life! Joined 10/24/2003 Comments 3337

@monster

x-ipb changes core files, when u update XOOPS you need updated core files for x-ipb.

i posted the core update for 1.4G on bbpixel.com the same day 2.0.10 was released, you should go there and download it if u want to use it with 2.0.10

2.0.10 has a big security hole!!

neoMJ Published 04/25/2005 21:56 Just popping in Joined 04/25/2005 Comments 6

Ok guys, I guess we have a problem with 2.0.10 release...

I use default NewBB as a forum and my wholse XOOPS site is upgraded to 2.0.10..

Let me explain what happens:

When I send a link from a "private forum" topic to somebody who is not a member of my site, and when I am logged in at the moment, as soon as the other side clicks on the link he takes over my account! That means I got automatically logged out and he becomes logged in with my user name! Without entering a password! Just clicking on the link...

I don't wanna be exaggerating anything but that seems to be a serious bug! Can anybody look at it?

Re: 2.0.10 has a big security hole!!

m0nty Published 04/25/2005 22:10 XOOPS is my life! Joined 10/24/2003 Comments 3337

see THIS thread for how to stop that..

it's not a XOOPS problem, but a server config problem

Re: 2.0.10 has a big security hole!!

neoMJ Published 04/25/2005 22:33 Updated 04/25/2005 22:34 Just popping in Joined 04/25/2005 Comments 6

Ok thx. I prevented it with an .htaccess file thanks to the help you gave me on that forum post.

Anyways, still I wanna say that depending on server config that much is too bad for security. Isn't there a better way to handle sessions? I am not an expert over this, but I would like to hear the ideas... If there is another way to handle it, maybe XOOPS should go that way... I don't know..

Just a suggestion.

Re: XOOPS 2.0.10 Stable Released

JasonMR Published 04/26/2005 0:56 Just can't stay away Joined 06/21/2004 Comments 655

@malexandria: try GIJOE's Blocks Admin Module

Re: XOOPS 2.0.10 Stable Released

Chappy Published 04/26/2005 5:45 Friend of XOOPS Joined 12/14/2002 Comments 456

Kudos to all who designed, coded and tested. Excellent work!

Re: XOOPS 2.0.10 Stable Released

bhavin Published 04/26/2005 6:25 Just popping in Joined 04/13/2005 Comments 6

I am using XOOPS 2.0.10 RC on my website. Kindly let us know that how to upgrade the same to XOOPS 2.0.10 stable version.

Thanks in advance,

Bhavin Shah

Re: XOOPS 2.0.10 Stable Released

bhavin Published 04/26/2005 7:09 Just popping in Joined 04/13/2005 Comments 6

I am using XOOPS 2.0.10 RC version on my website. Kindly let us know that how to upgrade the same to XOOPS 2.0.10 stable version.

Thanks in advance,

Bhavin Shah

Re: XOOPS 2.0.10 Stable Released

m0nty Published 04/26/2005 7:25 XOOPS is my life! Joined 10/24/2003 Comments 3337

please read the previous posts in this thread for how to update your RC version....

just overwrite them with the ones in the patch files..

Re: XOOPS 2.0.10 Stable Released

bhavin Published 04/26/2005 7:38 Just popping in Joined 04/13/2005 Comments 6

Thanks for reply.

Howerver, please note that following files are suggested for upgrading 2.0.10 RC2 to 2.0.10 final. Kindly let us know that any other files are to be uploaded in addition to the following files :

********************************************
There were only three files changed between 2.0.10 RC2 and 2.0.10 final:

docs/CHANGES.txt
html/include/version.php
html/modules/newbb/post.php

The last one applies only to newbb version 1.
************************************************

Thanking you,
Bhavin Shah

Re: XOOPS 2.0.10 Stable Released

m0nty Published 04/26/2005 7:44 XOOPS is my life! Joined 10/24/2003 Comments 3337

just use all the files from the patch

if ur using newbb2 instead of newbb1 then don't upgrade the newbb folder..

Re: XOOPS 2.0.10 Stable Released

bhavin Published 04/26/2005 7:55 Just popping in Joined 04/13/2005 Comments 6

Thanks for prompt response.

Kindly let us know that whether we should use patch for upgrading 2.0.9 to 2.0.10 for our purpose ?

Thanks,
Bhavin Shah

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/26/2005 7:55 XOOPS is my life! Joined 06/21/2003 Comments 6320

2.0.10 RC is not the same as 2.0.10 RC2 - there are more files changed between 2.0.10 RC and 2.0.10 stable. Upload the 2.0.9.2 -> 2.0.10 patch files and update the system module through modules administration and you should be fine.

Re: XOOPS 2.0.10 Stable Released

bhavin Published 04/26/2005 9:01 Updated 04/26/2005 9:23 Just popping in Joined 04/13/2005 Comments 6

I was getting the following error while viewing the post in NewBB version 1 in XOOPS 2.0.10 RC.

**********************************
Parse error: parse error, unexpected $ in /home/iaseadm/public_html/Xoops/modules/newbb/viewtopic.php on line 160
**************************************

After upgrading the same to XOOPS 2.0.10 with patch of 2.0.9, I am getting the same error.

Please help.

Thanks in advance,
Bhavin Shah

Re: XOOPS 2.0.10 Stable Released

indream Published 04/27/2005 15:07 Updated 04/28/2005 14:11 Not too shy to talk Joined 09/21/2004 Comments 170

ops
it's working a perfect
thanks (and flowers, chocolates :) )

Re: XOOPS 2.0.10 Stable Released

Tabasco Published 04/28/2005 1:11 Updated 04/28/2005 1:12 Quite a regular Joined 12/26/2003 Comments 203

Nevermind, it was my firewall

Re: XOOPS 2.0.10 Stable Released

Chappy Published 04/28/2005 5:53 Friend of XOOPS Joined 12/14/2002 Comments 456

My recommendation would be to overwrite all your files with the full core stable 2.0.10 (including xoops_root/modules/system but not including the other modules). Then update the system module. Perhaps something went goofy during the upload of the patch - it does happen. BUt, that's just what I would do. Unless one of these other fine folks suggests otherwise...

Re: XOOPS 2.0.10 Stable Released

MadFish Published 04/29/2005 7:08 Updated 04/29/2005 7:43 Friend of XOOPS Joined 09/27/2003 Comments 1056

Edit: Fixed. I had forgotten to upload the new System module folder (who needs a little thing like the System module?). I would like to nominate myself for the XOOPS Bonehead of the Year award :)

Still can't change back to the default template set though.

Might as well keep the rest as a 'note to the unwary' I suppose:

------

My custom blocks disappeared after upgrading 2.0.9.3=> 2.0.10. I've tried updating the System module and re-generating the dummy template (which was actually there even though I use a custom template set) but no luck.

So I tried to go back to the default template set, but I can't - I get the White Screen of Death and the following error in PHP debug mode:

 Maximum execution time of 1 second exceeded in /www/crushdepth.net/www/class/smarty/Smarty_Compiler.class.php on line 1769

Can anyone suggest a way out of this ?

Thanks

Re: XOOPS 2.0.10 Stable Released

Yantje Published 04/29/2005 11:37 Just popping in Joined 11/17/2004 Comments 11

Hey,

First of all: thanks to the dev-team for continuously improving xoops!

I have a problem which can maybe be related to the upgrade to 2.0.9.3 --> 2.0.10 . I am using newbb 2.02 so i did not upload any newbb file from the upgrade package (same counts for my news module). After the upgrade it is not possible anymore to select certain forums to be displayed in my newbb blocks. Everytime is select the forums the block admin falls back to "all". This issue can also be viewed in the newbb dev page: http://dev.xoops.org/modules/xfmod/forum/forum.php?thread_id=1562&forum_id=4

Anyone?

Re: XOOPS 2.0.10 Stable Released

georgev Published 04/30/2005 8:13 Updated 04/30/2005 8:29 Just popping in Joined 03/23/2005 Comments 4

i updated from 2.0.9.3 and now custom blocks dont working, i saw on previous posts that someone had the same problem, but i dont understand how to fix it.
EDIT: forget it, i'm a lamer (my first update), i just maked a system update from the administration menu and everything works fine now

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 04/30/2005 8:17 XOOPS is my life! Joined 06/21/2003 Comments 6320

Go to System Admin -> Modules -> Update the System Module

Re: XOOPS 2.0.10 Stable Released

Herko Published 04/30/2005 8:20 XOOPS is my life! Joined 02/04/2002 Comments 4238

geargev, please read the comments, this has been covered about 4 times: go to system admin -> modules, and click on the 'update' icon behind the System module. If you use a custom template set (see at system admin -> templates), you will have to generate the system template for the block_dummy manually (click on system templates, the block dummy template will be shown in yellow, click 'generate').

Herko

Re: XOOPS 2.0.10 Stable Released avatar bug

indream Published 05/04/2005 11:59 Updated 05/04/2005 12:20 Not too shy to talk Joined 09/21/2004 Comments 170

select avatar in gallery
and
change current avatar
not work.

because
i'm upload a XOOPS 2.9.2 edituser.php in XOOPS 2.0.10 stable this work

i think this bug

Re: XOOPS 2.0.10 Stable Released avatar bug

m0nty Published 05/05/2005 2:55 XOOPS is my life! Joined 10/24/2003 Comments 3337

can u elaborate on why they don't work??

what errors do u get? have u turned degug on in admin..

i have no problems with selecting/changing avatar in 2.0.10 without having to use 2.0.92 edituser files..

Re: XOOPS 2.0.10 Stable Released

shank Published 05/05/2005 18:34 Updated 05/05/2005 18:40 Not too shy to talk Joined 08/17/2004 Comments 144

One of my custom blocks still doesn't work.

It is the who's in chat block I did for Flashchat.

I have updated system module (twice), and have generated system block dummy thing in templates.

Also try to make a duplacate block at it won't show either.

Any ideas?

Re: XOOPS 2.0.10 Stable Released

Sebastian Published 05/08/2005 23:35 Updated 05/08/2005 23:38 Just popping in Joined 11/25/2004 Comments 23

EDIT: Nevermind, as soon as I posted this I found that my site is working fine; What seems to have done the trick was updating the System/Main Settings (don't make changes, just click "update")

Greetings,

I've upgraded and guess what - custom block content has disappeared.

I've done the following so far:

1) Replaced all 2.0.9.3 files with 2.0.10 from the 2.0.9.2-to-2.0.10 patch
2) Recompiled the Sytem module
3) Read this thread
4) Recompiled the System module again
5) Reuploaded the files and re-recompiled the module
6) Verified that the "system_block_dummy.html" is in place, with the content :

<{$block.content}>

; I'm using a default set.

Still, the content does not display. Any suggestions? I could do without the ustom blocks, but I'd rather not.

Re: XOOPS 2.0.10 Stable Released

pegasus00321 Published 05/11/2005 3:22 Quite a regular Joined 04/29/2005 Comments 339

I just upgraded to the new version and no hitches and no complaints. Well done!

Re: XOOPS 2.0.10 Stable Released

Society Published 05/18/2005 8:33 Not too shy to talk Joined 01/10/2002 Comments 178

Anyone got a Solution for the xcgal block? Same for the Adresses Module Block? Thank you

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 05/18/2005 8:45 XOOPS is my life! Joined 06/21/2003 Comments 6320

Have you updated the system module?

Re: XOOPS 2.0.10 Stable Released

Society Published 05/19/2005 13:57 Not too shy to talk Joined 01/10/2002 Comments 178

Yes of course; The first thing i try!

Re: XOOPS 2.0.10 Stable Released

Mithrandir Published 05/19/2005 16:35 XOOPS is my life! Joined 06/21/2003 Comments 6320

Then I don't know. Any PHP errors?

Re: XOOPS 2.0.10 Stable Released

Society Published 05/20/2005 8:14 Not too shy to talk Joined 01/10/2002 Comments 178

No thats another Problem.... no Errors in PHP.
I think somethings goes wrong, but i am not alone some other dudes got the same problem..

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 05/20/2005 10:14 Friend of XOOPS Joined 11/11/2004 Comments 3782

Have you updated your templates if you are using a cloned/custom set?

Re: XOOPS 2.0.10 Stable Released

Society Published 05/24/2005 8:33 Not too shy to talk Joined 01/10/2002 Comments 178

Yes i do :)

Re: XOOPS 2.0.10 Stable Released

jdseymour Published 05/24/2005 8:55 Friend of XOOPS Joined 11/11/2004 Comments 3782

Well, actually sorry for my vagueness, did you generate the missing system template in your cloned/custom template set?

Re: XOOPS 2.0.10 Stable Released

Society Published 05/24/2005 9:21 Updated 05/24/2005 9:22 Not too shy to talk Joined 01/10/2002 Comments 178

Yes i do this, too.

But now it work... seems something went wrong with my Database at the XOOPS update. I remove the modules and added it. Seems the Module-Update do not worked correctly but anyway thanks for ya help.

DJNews24.net are back now with all functions :)

Re: XOOPS 2.0.10 Stable Released

MadFish Published 05/24/2005 11:26 Friend of XOOPS Joined 09/27/2003 Comments 1056

I couldn't get the upgrade to work with my custom template set either (tried the suggested fixes). Eventually I gave up on the upgrade, installed a fresh copy of 2.10, copied the module tables over.

Had toset up the system module manually again, but at least I'm back online :)

Re: XOOPS 2.0.10 Stable Released

technews Published 01/28/2006 23:56 Just popping in Joined 03/30/2005 Comments 36

Hello all,

I have tried to upgrade from 2.0.9.3 to 2.0.10 files were uploaded ok but the update button in Admin-system is replaced by the following text:

Fatal error: Call to a member function on a non-object in /hsphere/local/home/technews/technews.gr/include/functions.php on line 131

which actually refers to the xoopSecurity GLOBAL...

It seems like a php problem.. any ideas ?

Login

Username

Password

Remember me

Search

Advanced Search

Donat-O-Meter

Stats
Goal:	$100.00
Due Date:	Nov 30
Gross Amount:	$0.00
Net Balance:	$0.00
Left to go:	$100.00

Latest GitHub Commits

{{ record.sha.slice(0, 7) }} - {{ record.commit.message | truncate }}

{{ record.commit.author.name }} {{ record.commit.author.date | formatDate }}