7
just to show you what i am working with this is 1 of 4 servers
Server Information
Processor Information
Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
Processor #1 speed: 2493.711 MHz
Processor #1 cache size: 3072 KB
Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
Processor #2 speed: 2493.711 MHz
Processor #2 cache size: 3072 KB
Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
Processor #3 speed: 2493.711 MHz
Processor #3 cache size: 3072 KB
Processor #4 Vendor: GenuineIntel
Processor #4 Name: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
Processor #4 speed: 2493.711 MHz
Processor #4 cache size: 3072 KB
Memory Information
Memory: 8183308k/9699328k available (3307k kernel code, 195240k reserved, 1840k data, 1296k init)
System Information
Linux server1.xxxxxxxxxxx.com 2.6.xx.19-xxx.2.35.fc10.x86_64 #1 SMP Mon Feb 23 13:00:23 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Physical Disks
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Current Memory Usage
total used free shared buffers cached
Mem: 8188048 2645952 5542096 0 308664 1744276
-/+ buffers/cache: 593012 7595036
Swap: 10223608 0 10223608
Total: 18411656 2645952 15765704
Current Disk Usage
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
908G 12G 850G 2% /
/dev/sda1 190M 21M 160M 12% /boot
tmpfs 4.0G 0 4.0G 0% /dev/shm
/dev/loop0 485M 13M 447M 3% /tmp